Distributorship

Getting your new car wrapped is one of the best, customizable, ways to protect your fresh paint job and help retain your vehicles value. Vinyl wraps keep harmful elements from getting at your paint. Take it off 5 years down the road and your car will look like it did they day you drove it off the lot. From clear paint protection film, to chromes and custom designs/graphics, we have something for everyone. If you can think it, we can do it. If you damage any part of it, it is easily and affordably replaceable. If someone keys your car or that shopping cart wandering in the parking lot hits you, instead of having to get the entire panel repainted and then blended to match the rest of the car, you can have that panel replaced much quicker and for a fraction of the cost.

The cost depends on the size of vehicle being wrapped but for an average size car it is very less as compared to re-spray

A professionally applied vehicle wrap will last between 3 and 5 years depending on how well it is taken care of. Like anything else, over time, everyday wear and tear will impact your wrap.  If you maintain your wrap, it has the potential to remain looking brand new for up to 6 or 7 years.

Yes. The vehicle wrapping films are of high-quality adhesives and can be easily removed within 5 years of the wrap being installed.

Applying specialist vehicle wrapping film to user vehicle will not damage user paintwork. Whatever If users already have stone chips, abrasions or rust patches on user paintwork, it’s important to remember that when the vinyl is removed it may pull loose paint off with it.

Vehicle wrapping is most effective when the whole vehicle is covered in a complete design, but users can choose to wrap just part of the vehicle, such as the rear doors or side panels.

Yes, we can wrap just about any smooth surface.  We have material that resembles wood grains or marble even. We can do things like your kitchen cabinets and counters, we have done a drum set before, sporting gear (snowboards, skis, skateboards, helmets, etc.), laptops, car interiors, wheels, breaks, boats, motorcycles, ATV, and jetskis

Vinyl wrap will only adhere to smooth, clean surfaces. A dirty, chipped or rusty surface will not allow the vinyl wrap to stick. Be sure to clean your vehicle and sand down chipping paint before trying to apply vinyl. Here are a few areas you should avoid wrapping:

• Window moldings or seals: Soft, rubbery surfaces like these are not ideal for vinyl wrapping. The adhesive can damage a surface like this, and it's unlikely to stay put for long.
• Door handles: Unpainted, plastic elements like door handles are not the best for vinyl adhesion. The wrap might peel back up over time. If you're doing a complete vehicle wrap, cut around these areas.
• Deep Paint Scratches: Scratches, chips and other defects in the paint will be magnified when the vinyl is installed. What's worse, removal of the vinyl also may cause the paint surrounding the damaged area to pull off. The only vinyl wrap film we can recommend to hide this damage is KENTEER 3D Carbon Fiber or Series Carbon Fiber films.

• Aftermarket Paint Jobs with Orange Peel Textures

Bad paint jobs with excess paint can cause an ‘orange peel’ effect that will not be hidden by a vinyl wrap. We recommend professional paint repair and proper cure time before a wrap should be applied to a vehicle. Even then, we cannot guarantee the condition of the paint once the wrap is removed. Still, if you're a brave soul then films like Brushed Metallic, Camouflage, Carbon Fibers may hide the orange peel texture upon which they are applied.

• Cars with Rusted Sheet Metal

Wraps won't stick to rust. We wish there was something else we could say but if your car or truck has exposed rust or oxidation the bubble-free adhesives simply will not bond. In essence, a rusty surface is no different than a dirty one and the rust particles will adhere to the film resulting in delamination.

• Vehicles with Peeling Clear Coat

Some people will tell you that a car wrap is not an option if the clear coat or paint is peeling. In general, it's recommended to install wraps only on factory painted vehicles for wrapping. However, if you do decide that a wrap is the only option that's going to work for you we strongly recommend having areas of paint that are chipping or peeling “feathered” or “sanded” by a body shop prior to wrapping to insure a smooth installation and prevent any future paint flaking. If you have a car with flaking paint or peeling clear coat we don't recommend Gloss, Flip or Chameleon films for these types of jobs although Carbon Fiber, Camouflage and Sticker Bomb films completely disguise any peeling below.

• Other Things You Shouldn't Try to Wrap

In addition to damaged and textured paint, there are a few other areas on any car you shouldn't try to wrap. Rubberized areas, trim made with ABS plastics and solar panels are just some of these.

Yes, we can make other sizes of packaging according to user requirements, or combine the two brands of packaging.

Normally our quotation will contain the common package (Inner- clear PE bag with plastic protectors at both ends; Outer- standard export seaworthy packing).

If users need own packages, had better advise users requirement ahead of time for an accurate quote.

If have any quality problems during use, all the products can be returned or according to consumer's requests.

Yes, we can do OEM order.

T/T, PayPal, Western Union, L/C，VISA, Master card, e-checking

We keep good quality and competitive price to ensure our customers / Distributor benefit.

EXW, FOB, CIF.

Generally, it will take 3 to 5 working days after receiving users advance payment. The specific delivery time depends on the items and the quantity of user order.

We can supply free sample book for customers, but the customers have to pay the courier cost; Users should pay some fee for full roll sample charge as our rule, it will be return after placing order as negotiate.

Yes, we have 100% test before delivery

1) Distributors have to fulfil the assigned monthly sales targets after a contract is signed.

2) The distributors must have sound knowledge about calendared vinyl.

3) We want established entities who have been associated with the automotive wrap industry for at least 3 years.

4) The company must have strategic, efficacious and productive marketing channels designed by a proactive team.

HS CODE 3919909090